WHAT OUR CUSTOMERS SAY

I have an ecoboost F150, and was told that there was no way to clean valves without damaging the turbos. Well this stuff works, and I’ve had no issues. I recommend this if you have a turbo on your vehicle.

  • Product Info
  • 05319: GDI IVD® Intake Valve & Turbo Cleaner – Amazon

This stuff works great, popped the cover on my 2016 Ford Edge Sport, found a vacuum port at the intake manifold and followed the directions. A friend who is also a mechanic recommended CRC intake cleaner saying it is what the shop charges $150-$200 to run through the engine. After letting the car sit per the direction a puff of smoke came out when I started it back up. Took it for a 10 minute drive and the difference was noticeable.

  • Product Info
  • 05319: GDI IVD® Intake Valve & Turbo Cleaner – Amazon

My transmission was slow to engage into gear and when taking off, the rpms would be 1.5x to 2.0x higher than they should be because a delay in shifting, that’s a dangerous condition if you drive in traffic that requires quick acceleration. The front of my home is a residential street, (25 mph) The back drive goes onto Route 50, (45 mph is the official posted speed limit, which puts the unofficial, “Psst!” & a “Wink-Wink” rush hour speed limit at about 62 mph). It’s a 4 lane, 2E × 2W Highway, so you can understand why I, a 30ish year old Tough Man with Boyish Good looks and charm, almost peed on himself when he left for work at 6:20 am and the Transmission decided not to shift on time, while I was pulling across 2 lanes and had headlights from all 4 lanes of traffic, approaching at 60+ mph!!! Well, I just put the TRANS-X additive in. Drove it around the track a few times, and Perfect! Just like new!

  • Product Info
  • 402015: Trans-X® Automatic Transmission Slip-Stop & Leak Fix

I almost gave the car away for scrap. I am skeptical about products that make claims like this but I really did not want to throw this car away for scrap as the repair is more than the car is worth. The local “Pick & Pull” auto junk yard offered $500.00. If the car was in good running condition it would be worth about $3500.00. Ford Windstar has a known problem of warping heads and this was my problem. As a last ditch effort I purchased this product, followed the instructions to the letter and to my amazement, It worked and worked well. As of this review, I have put about 5000 miles on the engine and it’s holding up just fine. Can’t say how long it will last but this is much better than junking the car which is in great shape otherwise. Four stars just for being such a hassle to take engine parts off and on.

  • Product Info
  • 401232: Permanent Head Gasket & Block Repair with Nanotechnology – Seattle, WA

Worked as promised. It took a lot of flushing to get water running clear, taking hoses off etc. running car watering cans etc… I took out the wet spark plug (my gasket leak was air to water/radiator) and iddled the car without it, with the stuff in. It then took just as long to flush out after the drying out period. It worked a treat, car runs perfectly now. I may get another bottle as I have two peugeot 306′s and they are prone to gasket failures (lh spark plug areas)

  • Product Info
  • 401232: Permanent Head Gasket & Block Repair with Nanotechnology – Michael

Excellent Product. Fiberlock Head Gasket and Block Repair is a really nice product and it is easy to use too. I like it so far.

  • Product Info
  • 401224-6: FiberLock® Head Gasket & Block Repair – Tom

High quality. This is very good consistency and works well on small delicate connectors, recommend this for all motorcycle electronic you may install.

  • Product Info
  • 05109: Technician Grade Dielectric Grease with Precision Tip Applicator

Used on my Yanmar sailboat diesel engine. Like cars, the fuel injectors get dirty and the engine does not run as smoothly. This is a great thing to use twice a year, at least. Noticeable difference in engine output and smoothness. Final step in any sort of tune-up and in between.

  • Product Info
  • 05228: Diesel Fuel Therapy® Diesel Injector Cleaner Plus, 1 Gal – Los Angeles, CA

This is a really good contact cleaner. I use this for light maintaince in computer and radio work. I recommend.

I cut it with water 1 part of oil to 30 parts of water to use it in a magnetic drill , it provides cooling and lubrication so the cutting head lasts long time