WHAT OUR CUSTOMERS SAY

05046

Unreal, this stuff is amazing it goes on like nail polish out of the can 0 corrosion. It really, really helps life of the battery.

  • Product Info
  • 05046: Technician Grade Battery Terminal Protector – Tailor

05103

Very happy with product. My company has been buying this product for a while now and are very happy with it. We have tried other brands but find this one to be the best.

  • Product Info
  • 05103: Quick Dry® Electronic Cleaner – Thomas

40173

Over 40 years of experience. The Tannery is the best stuff ever. It cleans and nurtures leather. I use it on all my leather gear. I had a leather belt that I took off of a jacket and found it years later. The jacket was like new. The belt was a bit dry and looked its age. I use The Tannery on plastic interior parts. It leaves a shine that can be lessened with wiping by a dry clean cloth. Makes the interior look new and gives it a leatherish type scent. Some may say it is overpowering, I think it gives your car that day one smell. No one sells this stuff anymore so you have to order it. I also use it on all my leather chairs and living room furniture. It makes the leather look like new. I had some light stains on an off-white sofa from a nearby decorative water fountain. The Tannery took them right off with about 3 applications. Even athletic shoes with leather trim can be shined up with The Tannery. Some leather conditioners soften the leather which is not good if you have a leather steering wheel. The Tannery cleans and leaves that new car sheen. If it is leather or even plastic, The Tannery is your overall solution.

  • Product Info
  • 40173: Tannery® Leather Cleaner – Detroit

05002

It works, our technicians love using this product. They say it works better than anything else they have used in the past.

  • Product Info
  • 05002: Freeze-Off® Super Penetrant – John, Raleigh, NC

06007

Jet ski loves this. My Honda Aqua trax calls out for this product specifically. There is a great reason. It works great. A must for boaters

  • Product Info
  • 06007: 6-56® Multi-Purpose Marine Lubricant – Kent, Montana

SL3121

Great, Stays in place. Will not wash out as easily as other grease. Good lub. All old grease must be removed, can’t be combined with different types.

  • Product Info
  • SL3121: Marine Boat Trailer and 4X4 Wheel Bearing Grease

14016

Great product, I order these all the time for the shop they hold up and when they don’t there are parts you can replace, how great is that!Great product, I order these all the time for the shop they hold up and when they don’t there are parts you can replace, how great is that!

  • Product Info
  • 14016: Sure Shot® Reusable Sprayer – Leanna, Tulsa, Oklahoma

05110

It is CRC, it is good. Have used it for several applications besides my MAF, and will be using it on a regular basis as needed.

  • Product Info
  • 05110: Mass Air Flow Sensor Cleaner – Fred, Hollywood, FL

05110

Worth every PENNY. I love this stuff. My recently rejuvenated 2004 Hyundai Elantra GLS 2.0 was having some hesitation issues just off idle, it was beginning to stutter under heavy load at low RPM’s, it didn’t NOT coast very well anymore, and it didn’t make as much power higher in the RPM range (3.5K +) as it used to.

Also, I had recently cleaned and re-oiled my K&N filter (which is outstanding) and re-installed into the factory airbox.

So, I pulled the MAF and used several hits from the CRC MAF cleaner. I observed a slimy grease/oil all over the metal screen and the sensor elements deeper inside the tube. After a few sprays, the sheen was gone. I re-installed and all of the above problems were fixed. In fact, the coasting and low-RPM performance (feels like a LOT more torque) has improved dramatically. Also MPG’s went up (no hard numbers yet, but the needle is definitely moving slower).

So, about the K&N. I have realized that the oil used on the K&N filter media has probably been sucked-up into the MAF and that this oil was the “gunk” that was coating the surfaces of the MAF. So, next time you clean and re-oil your K&N, make sure and clean your MAF about 1k miles afterward with this stuff. Just can’t beat it!

  • Product Info
  • 05110: Mass Air Flow Sensor Cleaner – Orlando, FL

05110

Safe cleaning fluid for your Toyota sensor. I paid a little extra for this stuff to be sure I did not damage my $100 sensor. The last time I cleaned my Mass Flow sensor it FAILED about 30k miles later, so this time I am trying this “special cleaner.” Always be careful to “gently” spray your sensor, as I feel a strong stream of any cleaning fluid may shorten the life of the fragile sensor components. You just need to get the build-up off, and nothing more.